Drop casting and Dip coating

Drop casting

Make a bubble of liquid on top of a surface then either

  1. Spin the chip on a spinner, or
  2. Wait 30 seconds and rinse with clean solvent, or
  3. Wait until on all solvent evaporates (this will leave drying spots, non-uniform coverage)

Dip coating

Dip the chip into the liquid, wait 5 - 30 seconds (depends on the recipe), pull out the chip and either

  1. Rinse with clean solvent, or
  2. Wait until on all solvent evaporates (this will leave drying spots, non-uniform coverage)

QR Code
QR Code drop_cast (generated for current page)