Installing labview

First goal is to get labview to control analog outputs on the DAQ. There are testing procedures for this built into the software.

Second goal is to get MeaSureit to work with the DAQ. MeaSureit requires that you set up “global virtual channels”. Using the measurement explorer (mx) you must set up the ao0 and ao1 channels and label them as AO0 and AO1. Similarly, ai0, ai1 and ai2 must be set up and labeled. The voltage limits on these channels should all be +/- 10V.

QR Code
QR Code installing_labview (generated for current page)