Differences

This shows you the differences between two versions of the page.

Link to this comparison view

mylar_masks [2009/02/13 11:33] (current)
ethanminot created
Line 1: Line 1:
 +====== Mylar Mask ======
 +[[purchasing_supplies|CAD art]] will print your mask design directly onto a transparency (mylar). You can draw features down to 10 micron resolution.
  
 +These mylar masks are flexible, so you need a glass backing for contact printing. Rick has attached the Mylar mask to a 4x4" glass plate. ​ He uses selotape to secure the mask to the glass plate, with good results. ​ That way he can easily switch Mylar masks and use the same 4x4" glass plate. ​ He purchased the glass from the hobby store near Fred Myers. "You need to make sure you get a fairly thin piece. If you get to thick of a piece of glass you will not have enough adjustment on the aligner to get the correct separation while aligning."​

QR Code
QR Code mylar_masks (generated for current page)